The chimney is composed of a complete set of exhaust gas collecting devices, which can reduce the pollution of the exhaust gas and make full use of the gas collecting capacity of the exhaust gas collecting system.
We always say that a set of waste gas treatment equipment also needs a lot of money. Regular cleaning, regular maintenance, regular maintenance, these steps, most companies will listen to our Jiangmen waste gas and wastewater treatment equipment company's suggestions to do so, but what is the specific reason that we need to clean up regularly? What are the consequences of our clean-up or not? Today, Jiangmen waste gas and wastewater treatment equipment company will use its own experience to explain to you.
1. After the waste gas treatment equipment is used, the temperature in the pipe will be reduced, the humidity will be too high, the water vapor will condense, and the dust will be easy to adhere. If it is not cleaned regularly, it will affect the normal operation and aging of the equipment function.
2. The wind speed of the pipe section of the waste gas treatment equipment decreases due to the air leakage of the equipment or the increased resistance of some parts.
3. The dust concentration in the air inhaled by the exhaust hood of the waste gas treatment equipment is too high, so the waste gas treatment equipment needs to be cleaned regularly.
4. The horizontal pipe section of waste gas treatment equipment system is too long, or the curvature radius of elbow is too small. If it is not cleaned regularly, it will affect the waste gas treatment effect.
Source: Jiangmen waste gas and wastewater treatment equipment company http://126aaa.cn
10-09
How to maintain environmental protection equipment in Jiangmen
1. The user shall carry out the concrete foundation construction according to the basic data provided by our company; the equipment should be installed on the concrete foundation more than 100 mm above the ground; 2. The supporting pipes and valves shall be separately supported and shall not be fixed on the tower equipment; 3. Attention shall be paid to the protection of the equipment during installation, so as not to damage the machine body and exposed parts. When the tower flange is connected
10-09
Ten maintenance details of spray tower of Jiangmen Guoqi environmental protection waste gas treatment equipment
Exhaust tower, in the type of exhaust tower, is one of the exhaust towers with long service life. It can deal with almost all mixed gases, so far it is a very practical and cheap product in the treatment of mixed waste gas. It is widely used in chemical industry, light industry, printing and dyeing, medicine, pharmacy, steel, machinery manufacturing, electronics, electroplating, painting, paint and other industries. It mainly deals with tail gas such as sulfuric acid, nitric acid and hydrofurani
10-09
Common points for attention in installation of waste gas and wastewater treatment equipment in Jiangmen
1. The user shall carry out the concrete foundation construction, and the installation surface of the foundation shall be on the same horizontal plane, and the allowable error shall not be greater than 5mm. The exhaust pipe of purification tower can be fixed by derrick type, and the foot is fixed with embedded steel plate by welding or embedded bolt. Therefore, the purification tower can not be fixed in general. The matching FRP fan is generally designed as steel frame vibration damping pedestal
10-09
Analysis of waste gas treatment equipment including those five factors
Waste gas treatment equipment is also known as waste gas purification equipment. Waste gas treatment refers to the pretreatment of the waste gas produced by industrial sites and factory workshops before discharge, so as to meet the national standards for external emission of waste gas. Today we Jiangmen environmental protection equipment home for you to introduce the analysis of waste gas treatment equipment including which five factors. General waste gas treatment includes organic waste gas tre