Waste gas treatment equipment is used in many industries. In fact, waste gas treatment equipment mainly uses different technologies to decompose and reduce harmful gases, so as to protect the environment. So in the use of what precautions? The following small to help you summarize the relevant knowledge.
Industrial waste gas treatment equipment has strong power, large air volume and better effect than other treatment equipment. It can remove benzene, toluene, formaldehyde and a series of exhaust gas, which is widely used in chemical plant, electronic factory, printing plant, spray painting workshop, petrochemical operation and other places with dust, odor and smoke.
1. Always check whether the spray in the absorption tower is blocked,
If the industrial waste gas treatment equipment is blocked, it should be cleaned up in time or the tower should be cleaned.
2. In the process of use, the acid-base concentration in the absorption solution should be checked in time. When the acid concentration is too high, the absorption solution should be replaced in time.
3. When the equipment is in continuous operation, stop the blower for 1-2 minutes before stopping the circulating water pump. When using, the circulating water pump should be started for 2 ~ 3 minutes, and then the blower.
4. The absorption liquid in the purification tower is added through the liquid filling tank. The liquid level is at the level of the inlet. After the industrial waste gas treatment equipment is operated, a part of the liquid will enter the circulation system, and the liquid will be added again to make it level with the liquid inlet; In the process of use, the use of absorption solution should be inquired. When it is found that the consumption is too much, it should be added in time. The absorption liquid should be checked every 8 hours, and it should be added in time when it is lack
5. In the process of using industrial waste gas treatment equipment, the above precautions should be grasped to prevent equipment damage in the process of use, and to better grasp the operation progress.
These are the summary of matters needing attention when using the waste gas treatment equipment of Jiangmen environmental protection equipment. I wonder how much knowledge you have learned after reading. In fact, these knowledge for many unfamiliar people and staff are very helpful, so we have a look at the above knowledge.
Source: Jiangmen environmental protection equipmenthttp://126aaa.cn
10-09
How to maintain environmental protection equipment in Jiangmen
1. The user shall carry out the concrete foundation construction according to the basic data provided by our company; the equipment should be installed on the concrete foundation more than 100 mm above the ground; 2. The supporting pipes and valves shall be separately supported and shall not be fixed on the tower equipment; 3. Attention shall be paid to the protection of the equipment during installation, so as not to damage the machine body and exposed parts. When the tower flange is connected
10-09
Ten maintenance details of spray tower of Jiangmen Guoqi environmental protection waste gas treatment equipment
Exhaust tower, in the type of exhaust tower, is one of the exhaust towers with long service life. It can deal with almost all mixed gases, so far it is a very practical and cheap product in the treatment of mixed waste gas. It is widely used in chemical industry, light industry, printing and dyeing, medicine, pharmacy, steel, machinery manufacturing, electronics, electroplating, painting, paint and other industries. It mainly deals with tail gas such as sulfuric acid, nitric acid and hydrofurani
10-09
Common points for attention in installation of waste gas and wastewater treatment equipment in Jiangmen
1. The user shall carry out the concrete foundation construction, and the installation surface of the foundation shall be on the same horizontal plane, and the allowable error shall not be greater than 5mm. The exhaust pipe of purification tower can be fixed by derrick type, and the foot is fixed with embedded steel plate by welding or embedded bolt. Therefore, the purification tower can not be fixed in general. The matching FRP fan is generally designed as steel frame vibration damping pedestal
10-09
Analysis of waste gas treatment equipment including those five factors
Waste gas treatment equipment is also known as waste gas purification equipment. Waste gas treatment refers to the pretreatment of the waste gas produced by industrial sites and factory workshops before discharge, so as to meet the national standards for external emission of waste gas. Today we Jiangmen environmental protection equipment home for you to introduce the analysis of waste gas treatment equipment including which five factors. General waste gas treatment includes organic waste gas tre